Hardware

Specifications:

• Powered by Tibbo OS (TiOS)
• 10/100Base-T, auto-MDIX Ethernet port
• Optional 802.11abgn Wi-Fi interface*
• 3-channel RS232/422/485 port on a DB9M connector
  • Port modes are software-selectable
  • Baudrates of up to 460,800bps
  • None/even/odd/mark/space parity modes
  • 7 or 8 bits/character
  • RTS/CTS and XON/XOFF flow control
  • Up to 3 serial channels in the RS232 mode, flexible mapping
    • One channel: RX, TX, CTS, RTS, DSR, and DTR lines
    • 3 channels: RX, TX, RX2, TX2, RX3, and TX3 lines
    • 6 additional arrangements
  • Up to 2 serial channels in the RS422 mode, flexible mapping
  • A single channel in the RS485 mode
• Built-in buzzer
• Optional 96x32 monochrome OLED display
• RTC (no backup battery)
• 22KB SRAM for Tibbo BASIC/C variables and data
• 1MB flash memory for TiOS, application code, and file system
• 2048-byte EEPROM for data storage
• Eight LEDs
  • Green and red main status LEDs
  • Yellow Ethernet link LED
  • Five blue LEDs (for Wi-Fi signal strength indication, etc.)
• Software-controlled PLL for selecting high or low speed
• Power: 12VDC (9 ~ 18V)
• Optional power-over-Ethernet (PoE)*
• Dimensions (LxWxH): 90 x 48 x 25mm
• Operating temperature range: -5 ~ +70°C
• Firmware is upgradeable through the serial port or network
• Tibbo BASIC/C application can be debugged through the Ethernet LAN
• CE- and FCC- certified.

* Wi-Fi and PoE options are mutually exclusive.

Included Accessories:

• DIN rail mounting plate
• Wall mounting plate with two screws

Optional Accessories:

• TB1100 terminal block adaptor (version "B" recommended)
• 12V/0.5A adaptor: APR-P0011(US),APR-P0012(EU),APR-P0013(UK)
• WAS-1499 straight Ethernet cable*
• WAS-P0004(B) DB9M-to-DB9F serial cable (device-to-PC)
• WAS-P0005(B) DB9F-to-DB9F serial cable (device-to-device)

See Also:

• WS1102 Wireless RS232/422/485 controller
• DS1100 Single-channel RS232 controller
• DS1101 3.5-channel RS232 controller

*For this device can be used as crossover cable too

Programming

Create powerful, network-enabled applications in Tibbo BASIC and Tibbo C. Learn more...

Platform objects:

• beep — generates buzzer patterns.
• button — monitors the MD (setup) button.
• fd — manages the flash memory file system and direct sector access.
• io — handles I/O lines, ports, and interrupts.
• lcd — controls the OLED display.
• net — controls the Ethernet port.
• pat — "plays" patterns on a pair of status LEDs.
• ppp — accesses the Internet over a serial modem (4G/LTE, etc.).
• pppoe — accesses the Internet over an ADSL modem.
• romfile — facilitates access to resource files (fixed data).
• rtc — keeps track of date and time.
• ser — controls the serial channels.
• sock — socket comms (up to 16 UDP, TCP, and HTTP sessions).
• stor — provides access to the EEPROM.
• sys — in charge of general device functionality.
• wln — handles the Wi-Fi interface.

Function Groups: 27 string functions, 8 date/time conversion functions, encryption/hash calculation functions (RC4, MD5, SHA-1), and more.

Variable Types: Signed and unsigned 8-bit, 16-bit, and 32-bit types; floating point and string types; user-defined arrays and structures.

Files and Documentation

TiOS Firmware	tios-ds1102n-3_70_02.bin — supports the WA2000 add-on; uploadable using Device Explorer* Files for Over-the-Air (OTA) firmware updates can be produced here.
SoI Firmware	soi_application-4_32a-ds1102n.bin
Documentation	DS110x Hardware Manual DS1102W Programming Platform Tibbo Modbus Gateway Manual
CE Certificate	ds110x-ce.pdf
FCC Certificate	ds110x-fcc.pdf

* Device Explorer is a part of Tibbo IDE (TIDE) software. It installs alongside TIDE, and you can also install it separately, without installing TIDE. Both TIDE and Device Explorer can be downloaded here.